In-depth library of simulation papers, reports and videos
3D Compression Molding Validation Report
The comparison between simulation and experiment includes short shots, fiber orientation and mechanical properties. Actual fiber orientation images were obtained using CT scanning. The comparison shows reasonable agreement between simulation and experimen
Great Flow Control Products with Simulation CFD
Solving challenges when designing flow control products and systems with CFD.
Building Wind Simulator Validation Brief
Designers can quickly and easily apply wind flows to a structure and get nearly instant results to either visualize surface pressures or generate wind loads to be used in further design and analysis.
3D Injection Compression Molding Validation Report
The injection-compression process is often used to produce parts with relatively small warpage at a low clamp force. An example case will be used to test the analysis.
Buckling Analysis in 3D Warp Validation Report
uckling analysis is useful for optimizing part and mold design, material choice, and processing parameters to help control part deformation. Classical linear buckling analyses generally yield sufficiently accurate results for most practical injection mold
Flow Analysis of the Bi-Injection Process
This report details how to setup and run a thermoplastics Bi-injection flow analysis, a capability made available in Autodesk Simulation Moldflow Insight 2014 (ASMI) midplane flow solver.
Transient Cool Conformal Cooling Validation
Conformal cooling channels are where the internal cooling channels are made to a shape that follows the precise geometry of the part in the mold.