Simulation Forums

Find Simulation answers, share expertise, and connect with your peers

Simulation CFD


A problem with void filling

192 Views, 4 Replies
01/09/2018 6:58 PM

Hello everyone !

 VUE DE FACE .pngVUE DE FACE .png

 I Have a problem with my model , I'm trying to fill the void with water. But I can't creat the liquid volume even thought I can creat surfaces at the outlet and inlet of the liquid. I made sure there is no void between the tube and the cylinder . Thank you in advance for your help !


Report Inappropriate Content
Message 1 of 4 ( Views: 192 )

Re: A problem with void filling

01/09/2018 8:44 PM

Hi @fadwa.y.soussi,

 

Thanks for reaching out to us on the forums! This usually means there's some small sliver gap so there is not a true, separate internal volume. Please check out this article on how to find the gap. 

 

Please let me know how it works.

 

 

 

Thanks, 



Matt Bemis

Technical Support Specialist


Report Inappropriate Content
Message 2 of 4 ( Views: 183 )

Re: A problem with void filling

01/16/2018 7:26 PM

Hello ,

 

Sorry for the late replay ! Yes I can see now why the voids are not filled . Thank you


Report Inappropriate Content
Message 3 of 4 ( Views: 166 )

Re: A problem with void filling

01/16/2018 7:27 PM

Hi @fadwa.y.soussi,

 

Fantastic! Best of luck with the modeling!

 

Thanks,



Matt Bemis

Technical Support Specialist


Report Inappropriate Content
Message 4 of 4 ( Views: 161 )